PP Systems WMA-5 - Default Settings; Calibration

WMA-5 Operation Manual V. 1.01 36 support@ppsystems.com
Default Settings
Default Settings
Yes Button
Resets WMA-5 to original factory settings then returns to Settings 4 Menu.
This function allows the user to initialize the WMA-5 to its factory default values.
This feature may be needed to correct an erroneous calibration, or to simply
undo undesirable configuration changes.
No Button
Returns to the Settings 4 Menu with no changes.
Calibration
This WMA-5 allows calibration of the CO
2
IRGA, the O
2
O Sensor, and the Touch Screen.
Calibration Menu
CO2 Button
To perform CO
2
calibration.
O2 Button
To perform O
2
calibration.
Touch Cal Button
To perform Touch Screen calibration
Back Button
Returns to the Main Menu.