7 Accessing System Information Ether232Plus User Guide
64 Precidia Technologies Inc. 02-CML000057
TELNET: login from xxx.xxx.xxx.xxx
accepted
The unit went into telnet configura-
tion mode, a password prompt was
given, and the correct password
(configured Remote Password) was
entered.
TELNET: login from xxx.xxx.xxx.xxx
rejected (timeout)
The unit went into telnet configura-
tion mode, a password prompt was
given, and the correct password was
entered, but no response was input
within the 30 second timeout period.
Unit does not reset.
TELNET: login from xxx.xxx.xxx.xxx
rejected (invalid password)
The unit went into telnet configura-
tion mode, a password prompt was
given, but the password entered did
not match the configured Remote
Password. Unit does not reset.
Port #n: Listening for connection on tcp
port pppp...
The unit will allow incoming TCP
connections on port pppp.
Port #n: Connection attempt to
xxx.xxx.xxx.xxx:pppp...
The unit is contacting the remote
server at the IP address and port
indicated.
Port #n: Incoming connection on tcp port
pppp from xxx.xxx.xxx.xxx:pppp
The unit has detected an incoming
communication from the remote host
indicated on port pppp.
Port #n: Connection was established with
xxx.xxx.xxx.xxx:pppp
The unit has established a TCP con-
nection with the remote host indi-
cated on port pppp.
Port #n: No response connecting to host
at xxx.xxx.xxx.xxx:pppp
The remote host has not responded
to any TCP session establishment
requests.
Port #n: No response from host at
xxx.xxx.xxx.xxx:pppp
The remote host is no longer
responding to TCP traffic (after it
had previously been responding).
Port #n: Connection was refused by
xxx.xxx.xxx.xxx:pppp...
The remote host actively refused a
connection request from the unit.
Table 7.3: System Log Messages
Message Description
To Next Page
Loading...