Precidia ipocket232 - Page 96

iPocket232 User Guide Appendix F: MCC
23-CML000293 iPocket232 Inc. F-4
Table F.1: Supported Commands
Command
Syntax
Description
Parameters
Hn
HOOK Closes an open
connection.
n = 0 (or no option present)
will close an open
connection.
In
INQUIRY Displays information about the
iPocket232.
n = 0 returns the product
name
n = 1 returns the product
name, the company
name, version string
and Device ID
n = 2 returns the informa-
tion listed above,
plus the IP addresses
for device
information, status,
log history, company
information and
support.
O
ONLINE (Go on-line)
Will return to an active connection if one exists
(escaped from via the "+++" command) or originate a
connection to the configured Remote host.
none
Qn
RESULT CODES DISPLAY
Allows you to choose whether result codes are
displayed after each command.
n = 0 (or no option present)
returns result codes
n = 1 will not return result
codes
Sr=n
SET REGISTER Set
value of register r to n.
r = register number
Note: r cannot be greater
than 14. Register
S13 is reserved. See
, SRegisters‚ on
page 8..
n = value to assign
Sr?
DISPLAY REGISTER Inquiry
about value of register r.
r = register number