iPocket232 User Guide Appendix F: MCC
23-CML000293 iPocket232 Inc. F-5
Table F.1: Supported Commands
RESULT CODES FORMAT
n = 0 (or no option present)
Choose how result codes are returned. displays result codes in numeric form
n = 1 displays result codes
in verbose (text)
form (default)
RESET none
Closes any active connection and resets the S-registers
to their saved values.
Table F.2: Extended AT& and AT+ Commands
DCD CONTROL Controls the
behavior of the DCD line.
n = 0 sets the DCD line as always
active
n = 1 sets the DCD line to follow
the connection status
(default)
DTR CONTROL
Sets how the iPocket232 will react to changes
in the DTR signal.
n = 0 ignore
n = 1 DTR on-off transition returns
modem to command mode
and maintains the connection
n = 2 DTR on-off transition returns
modem to command mode
and closes the connection
(default) n = 3 on-off
transition returns the
modem to command mode,
closes the connection, and
resets the S-registers and
command options to saved
values (as with ATZ)
To Next Page
Loading...