Model PD6000 Analog Input Process Meter Instruction Manual
Scaling the Meter (SCALE)
The process inputs (4-20 mA and ±10 VDC) can be scaled to display
the process variable in engineering units.
A signal source is not needed to scale the meter; simply program the
inputs and corresponding display values.
SCALE
Prog
Inp 1
SCALE
04.000
Inp 1
Inp 2
SCALE
20.000
Inp 2
dis 1
SCALE
004.000
dis 1
dis 2
SCALE
020.000
dis 2
For instructions on how to program
numeric values see
Setting Numeric
Values
, page 30.
36
To Next Page
Loading...
