© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Figure 26: Connectivity Automatic
6 The P80 will attempt to connect to the network, and when successful
will acquire the networking information necessary for registration.
If the console was already connected, it will skip straight to the
‘Network Settings’ screen and display the current network
information. Once a good IP Address has been acquired, the P80 can
now be registered. Continue with step 12.
7 Note: Manually setting up the network configuration is not
recommended. Precede with the following procedure only with
assistance from the facilities IT staff. Touch CONFIGURATION form
the Connectivity menu.
8 Touch on radio button next to Manual, and then touch SETTINGS.
To Next Page
Loading...
Need help?
General
