2.Disassembly
3. Grip the plastic loop at point and carefully, but firmly, ease it in the direction indicated by the arrow.
4. Lift the HDD assembly out of the computer’s hard disk bay (note when you reinsert the hard disk it should be
inserted at an angle towards the side illustrated).
5. Remove screws - from the hard disk assembly.
6. Take the HDD out of the case .
7. Insert the new HDD into the case and replace screws - .
8. Slide the hard disk assembly into the hard disk bay as illustrated, and replace the cover and screws (Figure 2 - 2).
1
2 5
6 7
2 5
1
2
3
4
5
b.
a. c.
6
7
Figure 2 - 3
HDD Assembly
Assembly Removal
a. Slide the HDD in the di-
rection of the arrow.
b. Lift the hard disk out of
the bay.
c. Remove the screws in or-
der to separate the HDD
from the case.
6. Hard Disk
7. Hard Disk Case
•4 Screws
TECHNICAL SERVICE MANUALPrestigio Visconte 125W
9
To Next Page
Loading...
