2.Disassembly
Removing the Hard Disk Drive
The hard disk drive is mounted in a removable case and can be taken out to accommodate other 2.5" IDE hard disk drives
with a height of 9.5mm (h). Follow your operating system’s installation instructions, and install all necessary drivers and
utilities (as outlined in Chapter 4 of the User’s Manual) when setting up a new hard disk.
1. Turn off the computer, turn it over and remove the battery (page 2 - 7).
2. Remove screws
& , and then remove the hard disk cover .
Figure 2 - 2
HDD Assembly
Cover Removal
a. Remove the 2 screws.
b. Remove the hard disk
cover.
3. Hard Disk Cover
•2 Screws
1 2 3
1
2
a. b.
3
TECHNICAL SERVICE MANUAL Prestigio Visconte 125W
8
To Next Page
Loading...
