56 516514
Section 5 Service Procedures
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the dryer(s) before servicing.
• Close gas shut-off valve to gas dryer(s) before servicing.
• Never start the dryer(s) with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the dryer is properly grounded.
W001R1
WARNING
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
SILICON CARBIDE IGNITION
SILICON NITRIDE IGNITION
Figure 41
IGNITER AND
BRACKET
BURNER
TUBE
TAB
BURNER
TUBE
AIR
SHUTTER
ATTACHING
SCREW
WHITE
CERAMIC
PORTION
D242SE1A
WR
D345PE1A
WIRE
HARNESS
IGNITION
CONTROL
COMBUSTION
DUCT
IGNITER AND
SENSOR
ASSEMBLY
BRACKET
GAS VALVE
ASSEMBLY
SCREW
SCREWS
SILICON CARBIDE IGNITION
SILICON NITRIDE IGNITION
Figure 42
1 - 3
4 5
SECONDARY
COIL
HOLDING
AND BOOSTER
COIL
4
5
1
3
2
D270SE3A
REDUNDANT
COIL
MAIN
COIL
D340SE3A
1 2
To Next Page
Loading...
