Prodigit 3270 Series User Manual

3270 Series Operation Manual 63
 BATT TIME: setting the BATT TIME, the Left 5 digit monitor display the
“BATT” ,the right upper 5 digit monitor display the “TIME”, and right lower monitor
display setting value, the unit is "S". The range is 1s to the 99999s.
 BATT Vth: Setting BATT threshold voltage; the Left 5 digit monitor display the
“BATT” ,the right upper 5 digit monitor display the “VTH”, and right lower monitor
display setting value, the unit is "V". The range is 0.01V to the full scale of the
Voltage specification.
• Press the Item key to enter the Item setting mode BATT PRESS START, the LED
Indicators is ON, and then press the setting key. The LED indicator is ON. To exit the
setting, press the EXIT key and select CP MODE. The setting sequence is as follows:
BATT PRESS START 
BATT MODE CP 
BATT CP 
BATT CF 
BATT PF LEAD 
BATT PF 
BATT TIME 
BATT VTH 

Prodigit 3270 Series Specifications

General

Brand	Prodigit
Model	3270 Series
Category	Measuring Instruments
Language	English