PROEL MS 32 - Foot Controller 2 Calibration

Proel MS 32 Owner's Manual
11
Press and release:
- the "
CCXXX/CONTINUE
" switch (  Æ
Æ
) to confirm the data and pass to the
display/modification of the following "GLOBAL" parameter or
- the "
SELECT/CHANNEL
" switch ( Æ
Æ
) to confirm the data and exit from "GLOBAL" parameter
programming.
FOOT CONTROLLER 2 CALIBRATION :
FC2 mn -- Mx --
Position the Foot Pedal inserted in the FC2
socket at minimum value and press the
START/STOP switch;
Position the Foot Pedal at maximum value
and press the START/STOP ( Æ
Æ
) switch.
OK is displayed twice on the screen.
FC2 mn Ok Mx Ok