PROEL MS 32 - Factory Reset & MIDI Data Dump

Proel MS 32 Owner's Manual
45
FACTORY RESET & MIDI DATA DUMP
The MS-32 pedalboard is provided with the following functions:
- FACTORY RESET to restore the original parameters set by the manufacturers.
- MIDI DATA DUMP (transmission) to download the memory parameters via Midi on a
connected Sequencer or Computer.
- MIDI DATA DUMP (reception) to reload via Midi the memory parameters previously saved in a
connected Sequencer o Computer.
When powered-on through the "
MODE/WRITE
" switch, the display of the pedalboard shows the
following screen shot; release then the "
MODE/WRITE
" switch;
W
rtPtch 0-0? W/S
Factory Reset
or
Data Midi Dump
Press the "0" or "9" switches ( Æ
Æ
) to select,
respectively, Factory Reset or Data Midi
Dump functions.
Press the START/STOP switch (  Æ
Æ
) to
exit from the Factory/Dump screen shot
and go back to the main menu.
Exit
0-Factory 9-Dump