PROEL MS 32 - Global Parameters; Power-On Name

Proel MS 32 Owner's Manual
7
GLOBAL PARAMETERS
- 10 characters name,
- SET and PATCH numbers displayed at power on
- the midi Basic channel and
- the calibrations for the Foot Controllers 1 and 2
- the assignment of the CONTINUE switch can be programmed as follows:
Power on the MS32 by keeping the "
SELECT/CHANNEL
" switch pressed; as soon as the stored
name is displayed, release the "
SELECT/CHANNEL
" switch;
POWER-ON NAME :
The "10  " and "10  " switches ( Æ
Æ
)
allow you to choose the character to be
inserted.
(Keeping the switch pressed the characters
will shift automatically).
Use the "  5" and "6  " switches (  Æ
Æ
)
***User Name ***
Character Cursor
***User Name ***