PROEL MS 32 - Factory Reset

46
Proel MS 32 Owner's Manual
FACTORY RESET:
Pressing and releasing the "0" switch, the display will show:
Press and release:
- the "CC XXX/CONTINUE" switch ( Æ
Æ
) to reset the pedalboard with all the Factory parameters;
all the parameters of the GLOBAL, SET and PATCH memories are removed and reset at
"factory" value.
- the "START/STOP" switch (  Æ
Æ
) to exit from the "FACTORY" function.
- If the Continue switch is pressed, the pedalboard will display:
and go back to the main screen shots.
- Press Start/Stop to exit from the "FACTORY" function; the pedalboard will display the main
screen shots.
Reset Continue?
Reset Continue?
Loading Factory!