PROEL MS 32 - Power-On Set & Patch Recall

8
Proel MS 32 Owner's Manual
Press and release:
- the "CCXXX/CONTINUE" switch (  Æ
Æ
) to confirm the data and pass to the
display/modification of the following "GLOBAL" parameter or
- the "SELECT/CHANNEL" switch ( Æ
Æ
) to confirm the data and exit from "GLOBAL" parameter
programming.
POWER-ON SET & PATCH RECALL :
Press the "10  " and "10  " switches ( Æ
Æ
)
to choose the value (from 0 to 9) to be
inserted. (Keeping the switch pressed the
characters will shift automatically).
Use the "  5" and "6  " switches (  Æ
Æ
)
to move the cursor from SET to PATCH.
SET 0 & PATCH 0
SET 0 & PATCH 0
Value Cursor