PROEL MS 32 - Fc2 Assign

30
Proel MS 32 Owner's Manual
FC2 ASSIGN :
Press and release:
- the "CCXXX/CONTINUE" switch (  Æ
Æ
) to confirm the data and display/modify the following
“PATCH” parameter or
- the "SELECT/CHANNEL" switch ( Æ
Æ
) to confirm the data and exit from “PATCH” parameter
programming.
FC2 mn 0 Mx127
FC2 to 11 AB On
Value Cursor
Press the "10  " and "10  " switches ( Æ
Æ
)
to select a Control Change value from 0 to
120, the A/B/AB channel, and the On/Of
f
position.
(Keeping the switch pressed the characters
will shift automatically).
Use the "  5" and "6  " switches (  Æ
Æ
)
to move the cursor back and forward.