PROEL MS 32 - A CHANNEL PROGRAMMABLE Y CONTROL CHANGE

38
Proel MS 32 Owner's Manual
A CHANNEL PROGRAMMABLE "y" CONTROL CHANGE :
Press and release:
- the "CCXXX/CONTINUE" switch (  Æ
Æ
) to confirm the data and display/modify the following
"PATCH" parameter or
- the "SELECT/CHANNEL" switch ( Æ
Æ
) to confirm the data and exit from "PATCH" parameter
programming.
B c0= Of c32= 0f
A
yCC 93 = 0
Value Cursor
Press the "10  " and "10  " switches ( Æ
Æ
)
to select a value from 0 to 120 and 0 to
127, in the Off condition, to be inserted,
respectively, as the type and the value o
f
A channel control change.
Use the "  5" and "6  " switches (  Æ
Æ
)
to move the cursor back and forward.