WARNING!
– Unexpected starting after a failure, malfunction of
the controller / power supply or as an action
wanted due to a control process
–
Danger due to unexpected actions of the system
– In event of a failure / malfunction of the controller
or power supply, the measuring / control station
must be disconnected from the power supply. For
further information, read the operating instructions
of the devices and sensors used
NOTICE!
– Secure the measuring / control station against
unauthorised access
–
Please also observe the operating instructions for
controllers and fittings and any other component
groups, such as sensors, sample water pumps ...
– Observe the resistance of the wetted materials for
all modules (see also, e.g. also the ProMinent
resistance list in the product equipment catalogue
or at www.prominent.com)
– Protect the measuring / control station against
direct sunlight and other UV sources
– Observe the basic rules for ergonomic principles
2.3 Correct and proper use
NOTICE!
Compensation for control deviations
Damage to the product or its surroundings
– The controller can be used in processes, which
require compensation of > 30 seconds
NOTICE!
Correct and proper use
The unit is intended to measure and regulate liquid
media. The marking of the measured variables is
located on the controller and is absolutely binding.
The unit may only be used in accordance with the
technical details and specifications provided in this
operating manual and in the operating manuals for the
individual components (such as, for example, sensors,
fittings, calibration devices, metering pumps etc.).
Any other uses or modifications are prohibited.
Safety and responsibility
10
To Next Page
Loading...
Need help?
General
