Promise Technology Apollo Cloud 2 Duo User Manual

USB Operations with Apollo
Apollo features a USB 3.0 port that can be used for various functions using a USB storage
drive. You can use a USB storage drive to Backup or Restore data from the Apollo (see
requirements for USB storage drive below). You can also transfer data from a USB drive to the
Apollo. Backup and Restore using a USB storage drive are available using the App or the
Apollo Utility. For the USB Transfer function (upload from USB drive to Apollo), use the Apollo
Utility. The Backup and Restore procedure is the same for the App or the Utility. !
Note that USB storage drive operations are available only to the Apollo owner.
USB Drive Requirements for Apollo Backup/Restore
For Apollo Backup and Restore on USB storage functions, the USB storage device must fit the
following requirements:!
• File system: exFAT, NTFS, HFS, EXT3 or EXT4!
• 4 TB or greater capacity!
!
• USB 3.0 port (recommended) or USB 2.0 port !
&
45
USB 3.0 Port
Connect to USB storage
Important !
Only the Apollo owner can use USB
Backup, Restore and Transfer functions.

Promise Technology Apollo Cloud 2 Duo Specifications

General

Storage media	HDD
Internal memory	1024 MB
Processor frequency	1000 MHz
Built-in storage media	Yes
Internal storage capacity	8 TB
Mobile operating systems supported	iOS
Number of storage drives installed	2
Product color	White
LED indicators	Power
AC adapter frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
USB 2.0 ports quantity	0
Ethernet LAN data rates	1000 Mbit/s
USB data transfer rates	5000 Mbit/s
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	1
Cables included	LAN (RJ-45)

Weight and Dimensions

Depth	213.3 mm
Width	123.23 mm
Height	137.41 mm
Weight	2300 g