Promise Technology Apollo Cloud 2 Duo User Manual

Using Apollo Mirror
Use Apollo Mirror to mirror the contents of one Apollo to another Apollo for redundancy.
Mirroring to another device is a good idea if you choose not to mirror the hard drives in the
initial setup. To mirror the Apollo Cloud 2 Duo, use a new Apollo Cloud 2 Duo or use one that
has been reset not yet claimed. If you are using a device that was previously claimed, backup
all data on the Apollo that will be the mirror, make sure the firmware is up to date, then reset
the Apollo so the it is unclaimed.!
Using Apollo Mirror with the App
If you are using a device that was previously claimed, backup all data, make sure the firmware
is up to date, then reset the Apollo so the it is unclaimed. Apollo Cloud 2 Duo can only be
mirrored to another Apollo Cloud 2 Duo that is not claimed. !
To setup Apollo Mirror with the App:c!
1. In the Settings menu, select Apollo Mirror. A new menu appears. This is the claim menu you
saw when you setup Apollo. You will perform the same procedure to claim another Apollo,
except it will be used for mirroring only. !
&
55
Note!
Launching Apollo Mirror will automatically empty the
Trash before the mirroring process starts. Make sure you
are not deleting something you want to keep before
starting.

Promise Technology Apollo Cloud 2 Duo Specifications

General

Storage media	HDD
Internal memory	1024 MB
Processor frequency	1000 MHz
Built-in storage media	Yes
Internal storage capacity	8 TB
Mobile operating systems supported	iOS
Number of storage drives installed	2
Product color	White
LED indicators	Power
AC adapter frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
USB 2.0 ports quantity	0
Ethernet LAN data rates	1000 Mbit/s
USB data transfer rates	5000 Mbit/s
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	1
Cables included	LAN (RJ-45)

Weight and Dimensions

Depth	213.3 mm
Width	123.23 mm
Height	137.41 mm
Weight	2300 g