Promise Technology Apollo Cloud 2 Duo User Manual

Using Apollo Mirror with Apollo Utility
Apollo Mirror can be done using a new Apollo Cloud 2 Duo or one that is not claimed. If you
are using a device that was previously claimed, backup all data on the Apollo that will be the
mirror, make sure the firmware is up to date, then reset the Apollo so the it is unclaimed. Apollo
Cloud 2 Duo can only be mirrored to another Apollo Cloud 2 Duo that is not claimed. !
To setup Apollo Mirror: !
1. In the Settings menu,
select the Apollo Mirror
menu. !
2. Make sure both Apollo
devices are powered on
and connected to the same
network. Click the Start
button. The Utility begins
searching for any
unclaimed Apollo on the
network.
59

Promise Technology Apollo Cloud 2 Duo Specifications

General

Storage media	HDD
Internal memory	1024 MB
Processor frequency	1000 MHz
Built-in storage media	Yes
Internal storage capacity	8 TB
Mobile operating systems supported	iOS
Number of storage drives installed	2
Product color	White
LED indicators	Power
AC adapter frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
USB 2.0 ports quantity	0
Ethernet LAN data rates	1000 Mbit/s
USB data transfer rates	5000 Mbit/s
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	1
Cables included	LAN (RJ-45)

Weight and Dimensions

Depth	213.3 mm
Width	123.23 mm
Height	137.41 mm
Weight	2300 g