Need help?Do you have a question about the ProSoft Technology PLX3 Series and is the answer not in the manual?
General| Brand | ProSoft Technology |
|---|---|
| Model | PLX3 Series |
| Category | Gateway |
| Language | English |
Details the minimum hardware and software components required for the ProSoft Configuration Builder.
Lists the components included with the gateway, essential for installation and configuration.
Provides instructions and diagrams for physically mounting the gateway unit.
Explains the function and usage of the three sets of jumper settings on the module.
Details the behavior and usage of the optional SD card for configuration data.
Provides instructions on how to properly connect power to the gateway unit.
Guides users through the installation process of the ProSoft Configuration Builder software.
Explains how to access and utilize the integrated Help system for ProSoft Configuration Builder.
Details the initial steps for setting up a new project within the ProSoft Configuration Builder.
Describes how to rename project objects within the ProSoft Configuration Builder interface.
Provides steps for configuring the various drivers within the gateway's setup.
Explains the advanced feature for copying data between gateway memory areas.
Details the procedure for configuring the gateway's Ethernet network settings, including IP address.
Guides users on how to transfer the configured project file from the PC to the gateway.
Explains how to print the current gateway configuration settings.
Describes the status and meaning of the gateway's LED indicators for troubleshooting.
Explains how to use the ProSoft Configuration Builder's diagnostic tools.
Details the location and meaning of gateway status data stored in upper memory.
Provides detailed specifications for the gateway's hardware components and capabilities.
Offers information on cable types and pin assignments for the gateway's serial ports.
Provides a high-level overview of the EtherNet/IP protocol's functionality and capabilities.
Details the configuration steps for various EIP connection types, including Class 3 Server and Class 1.
Explains how to use ProSoft Configuration Builder for EIP driver diagnostics.
Covers specific references for EIP, including SLC and MicroLogix, PLC5, and ControlLogix processors.
Introduces the Modbus TCP/IP protocol and its functionality for the gateway.
Details the configuration parameters for MBTCP servers and clients.
Explains how to perform diagnostics for the MBTCP driver using ProSoft Configuration Builder.
Provides reference information on the Modbus protocol specification and function codes.
Describes the Modbus Serial protocol's Master and slave capabilities.
Details the configuration parameters for MBS ports, including Master and Slave settings.
Explains how to access diagnostic information for the MBS driver.
Covers Modbus protocol specifications relevant to MBS, including function codes.
Introduces the ASCII protocol for interfacing with ASCII devices.
Details the configuration parameters for ASCII ports, including data flow and modes.
Explains how to perform diagnostics for the ASCII driver.
Provides an overview of the Siemens Industrial Ethernet (SIE) protocol.
Details the configuration steps for SIE clients and commands.
Explains how to access diagnostic information for the SIE driver and its error codes.
Covers SIE references, including maximum register counts for various Siemens CPUs.
Introduces the PROFINET protocol and its benefits for automation.
Guides users through configuring the PLX31-EIP-PND module using ProSoft Configuration Builder.
Details the tasks required to set up the module with Siemens Step 7 software.
Provides information on PND driver status, error codes, and connection status.
Details how to contact ProSoft Technical Support and the information needed.
Provides information on ProSoft Technology's terms and conditions for sale, warranty, and support.
To Next Page
