What to do if ProSoft Technology PLX3x power is not connected?
If the ProSoft Technology Gateway isn't getting power, start by checking the power connection to ensure it is properly connected. Also, verify that the power source is sufficient to power the gateway.
What to do if ProSoft Technology PLX3x detects no physical network connection?
If the ProSoft Technology Gateway shows no physical network connection, you won't be able to communicate over Ethernet. Check the wiring and cables to ensure they are properly connected and functioning.
What to do if ProSoft Technology PLX3x Gateway has a critical error?
If a critical error occurs on the ProSoft Technology Gateway, where the program executable has failed or been terminated, try pressing the Reset button or cycle the power to clear the error.
What does it mean when ProSoft Technology Gateway is in configuration mode?
When the ProSoft Technology Gateway is in configuration mode, it means either a configuration error exists, or the configuration file is being downloaded or read. After power-up, the gateway reads the configuration, implements the configuration values, and initializes the hardware.
What to do if ProSoft Technology PLX3x Gateway has an error condition on application ports?
If an error condition is detected on one of the application ports of the ProSoft Technology Gateway, check the configuration and troubleshoot for communication errors.
General| Vendor | ProSoft Technology |
|---|---|
| Category | Gateway |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Mounting | DIN rail |
| Series | PLX3x Series |
| Relative Humidity | 5 to 95% (non-condensing) |
| Power Supply | 24V DC (18-32V DC) |
| Enclosure | IP20 rated |
| Protocol Support | EtherNet/IP |
| Interface | Ethernet |
| Certifications | CE, UL |
Introduces the PLX3x gateway features, configuration, and system integration.
Lists minimum hardware and software for ProSoft Configuration Builder.
Details the items included with the PLX3x gateway for installation.
Step-by-step instructions for physically installing the gateway.
Explains the function of module jumpers for configuration.
Describes the use of an SD card for configuration backup and recovery.
Instructions for safely connecting power to the gateway.
Guide to installing the necessary configuration software.
Steps to establish network connection between PC and gateway.
Procedure for assigning a temporary IP for initial communication.
Guide to initiating a new project in the configuration software.
Explains how to disable unused ports to simplify configuration.
General process for setting gateway operational parameters.
Specific steps to set Ethernet port parameters for the gateway.
Describes how to map data between gateway memory areas.
Steps to transfer configuration from PC to the gateway.
Steps to retrieve configuration from the gateway to PC.
Overview of gateway LEDs for status and troubleshooting.
Details the function of main gateway front panel LEDs.
Explains the LEDs for the Ethernet communication port.
Explains LEDs for serial communication ports.
Guide to using PCB for diagnostics.
Describes the available diagnostic commands in PCB.
How to record diagnostic data for analysis.
Tool for analyzing serial data traffic.
Procedures for restarting the gateway.
Information on accessing gateway status data.
Technical details about the gateway's hardware components.
Details on electrical and protection aspects of serial ports.
Information on cables and pinout assignments for serial ports.
Specific RS-232 connection type description.
Specific RS-232 connection type description.
Details on RS-422 interface connection.
Details on RS-485 interface connection.
Introduction to the EtherNet/IP protocol functionality.
Key specifications for the EIP driver.
Describes the gateway's internal database structure for EIP.
Steps for configuring the EtherNet/IP protocol on the gateway.
Detailed steps for setting up EIP Class 3 Server.
Detailed steps for setting up EIP Class 1 Connection.
Detailed steps for EIP client connections.
Tools and information for diagnosing EIP network issues.
Reference information for EIP protocol implementation.
Introduction to the Modbus TCP/IP protocol functionality.
Key specifications for the MBTCP driver.
Describes the gateway's internal database structure for MBTCP.
Steps for configuring the Modbus TCP/IP protocol on the gateway.
Detailed steps for setting up MBTCP Servers.
Detailed steps for setting up MBTCP Clients.
Detailed steps for MBTCP client commands.
Tools and information for diagnosing MBTCP network issues.
Reference information for MBTCP protocol implementation.
Introduction to the Modbus Serial protocol functionality.
Key specifications for the MBS serial driver.
Specifications for master/slave port operations.
Describes the gateway's internal database structure for MBS.
Steps for configuring the Modbus Serial protocol on the gateway.
Detailed steps for setting up MBS ports.
Detailed steps for MBS port commands.
Tools and information for diagnosing MBS network issues.
Reference information for MBS protocol implementation.
Introduction to the ASCII protocol functionality.
Key specifications for the ASCII driver.
Describes the data flow for the ASCII driver.
Describes the gateway's internal database structure for ASCII.
Explains different operational modes for the ASCII driver.
Steps for configuring the ASCII protocol on the gateway.
Detailed steps for setting up ASCII ports.
Tools and information for diagnosing ASCII network issues.
Introduction to the Siemens Industrial Ethernet protocol.
Key specifications for the SIE driver.
Describes the gateway's internal database structure for SIE.
Steps for configuring the SIE protocol on the gateway.
Detailed steps for setting up SIE client connections.
Detailed steps for SIE client commands.
Tools and information for diagnosing SIE network issues.
Reference information for SIE protocol implementation.
Introduction to the PROFINET protocol functionality.
Key specifications for the PND driver.
Describes the gateway's internal database structure for PND.
Steps for configuring the PROFINET protocol on the gateway.
Detailed steps for PROFINET PIE connection.
Detailed steps for configuring the PND module map.
Steps for configuring the gateway with Siemens Step 7.
Procedure to create a variable table for input values.
Procedure to create a variable table for input values.
Procedure to create a variable table for input values.
Procedure to create a variable table for input values.
Tools and information for diagnosing PND network issues.
Information on PND protocol performance rates.
Information on how to contact technical support for assistance.
Details regarding the product warranty terms and conditions.
To Next Page
