Start Here PLX3x Series ♦ Multi-Protocol Gateways
User Manual
Page 10 of 215 ProSoft Technology, Inc.
January 25, 2018
1.2 System Requirements
The ProSoft Configuration Builder configuration software for the PLX3x gateway
requires the following minimum hardware and software components:
Pentium
®
II 450 MHz minimum. Pentium III 733 MHz (or better)
recommended
128 Mbytes of RAM minimum, 256 Mbytes of RAM recommended
100 Mbytes of free hard disk space (or more based on application
requirements)
256-color VGA graphics adapter, 800 x 600 minimum resolution (True Color
1024 768 recommended)
Supported operating systems:
Microsoft Windows 7 (32 bit) (64bit not tested)
Microsoft Windows Vista (not tested)
Microsoft Windows XP Professional with Service Pack 1 or 2
Microsoft Windows 2000 Professional with Service Pack 1, 2, or 3 (not
tested)
Microsoft Windows Server 2003 (not tested)
1.3 Package Contents
The following components are included with your PLX3x gateway, and are all
required for installation and configuration. The quantity of cables provided
depends on the specific protocol combination for your gateway.
Important: Before beginning the installation, please verify that all of the following items are
present.
Gateway with Ethernet Port
Tool for wiring and securing the power connector
PLX3x gateway power connector
Gateway with Two Ethernet Ports
Tool for wiring and securing the power connector
PLX3x gateway power connector
To Next Page
Loading...
Need help?
General
