ProSoft Technology PLX3 Series User Manual

PLX3x Series Start Here
Ethernet and Serial Gateways User Manual
ProSoft Technology, Inc. Page 9 of 218
May 26, 2016
1 Start Here
In This Chapter
 System Requirements ........................................................................ 9
 Package Contents ............................................................................ 10
 Mounting the Gateway on a DIN-rail ................................................. 11
 Jumper Settings ................................................................................ 12
 SD Card ............................................................................................ 12
 Connecting Power to the PLX3x Gateway ........................................ 13
1.1 System Requirements
The ProSoft Configuration Builder configuration software for the gateway
requires the following minimum hardware and software components:
 Pentium
®
II 450 MHz minimum. Pentium III 733 MHz (or better)
recommended
 128 Mbytes of RAM minimum, 256 Mbytes of RAM recommended
 100 Mbytes of free hard disk space (or more based on application
requirements)
 256-color VGA graphics adapter, 800 x 600 minimum resolution (True Color
1024  768 recommended)
 DVD drive
Supported operating systems:
 Microsoft Windows 7 (32 bit)
 Microsoft Windows XP Professional with Service Pack 1 or 2

ProSoft Technology PLX3 Series Specifications

General

Brand	ProSoft Technology
Model	PLX3 Series
Category	Gateway
Language	English