PLX3x Series EIP Protocol
Ethernet and Serial Gateways User Manual
ProSoft Technology, Inc. Page 65 of 218
May 26, 2016
the command. If a value of -1 is entered for the
parameter, the field will not be used in the command,
and the default file will be used.
Specifies the element in the file where the command
will start.
Specifies the sub-element to be used with the
command. Refer to the AB documentation for a list of
valid sub-element codes.
This field can be used to give a 32 character comment
to the command.
To Next Page
Loading...
