Protec Digilite DL500 - Clearing the Historic Test Event Log; Clearing the Historic General Event Log

N93-582-01 Issue 1 NH Page 29 of 42 © Protec Fire Detection plc 2015
10.12 Clearing the Historic Test Event Log
1. Enter the user code supplied with the system and press the ↵
↵↵
↵ key to access the menus.
2. Using the ◄ and ► keys navigate to the CLEAR TEST EVENT LOG menu screen press the ↵
↵↵
↵
key to accept the option.
3. A warning screen ( illustrated in figure 10.9 ) will be displayed to verify if events should be
cleared.
4. Press the ↵
↵↵
↵ key to clear the fire event log and return to the main menu.
5. Press the Back or Escape keys to return to the main menu without clearing the log.
Figure 10.9 Clear Fire Event Log warning display
10.13 Clearing the Historic General Event Log
1. Enter the user code supplied with the system and press the ↵
↵↵
↵ key to access the menus.
2. Using the ◄ and ► keys navigate to the CLEAR GENERAL EVENT LOG menu screen press
the ↵
↵↵
↵ key to accept the option.
3. A warning screen ( illustrated in figure 10.10 ) will be displayed to verify if events should be
cleared.
4. Press the ↵
↵↵
↵ key to clear the fire event log and return to the main menu.
5. Press the Back or Escape keys to return to the main menu without clearing the log.
Figure 10.10 Clear General Event Log warning display
All general log data
will be permanently
deleted
Continue ?
All TEST log data
will be permanently
deleted
Continue ?