protech PA-6225 - Page 108

Chapter 3 Software
PA-6225 SERIES USER MANUAL
Page 101
GS $ nL nH
[Name]
Set absolute vertical print position in page mode
[Format]
ASCII GS $ nL nH
Hex. 1D 24 nL nH
Decimal 29 36 nL nH
[Range]
0 ≤ nL ≤ 255, 0 ≤ nH ≤ 255,
[Description]
Specifies the character vertical direction position for the data expansion
starting position using the absolute position based on the starting point in
page mode. The position of the character vertical direction for the next data
expansion starting position is the position specified by [(nL + nH x 256) x
basic calculated pitch] from the starting point.
 When not in page mode, this command is ignored.
 Specifications for absolute positions that exceed the specified print range
are ignored.
GS * X Y [d1…d(X x Y x 8)]
[Name]
Define download bit images.
[Format]
ASCII GS * X Y [d1…d(X x Y x 8)]
Hex. 1D 2A X Y [d1…d(X x Y x 8)]
Decimal 29 42 X Y [d1…d(X x Y x 8)]
[Range]
1 ≤ X ≤ 54 (for 2 inch)
1 ≤ X ≤ 72 (for 3 inch)
1 ≤ Y ≤ 96
0 ≤ d ≤ 255