3-1-2. Intel
®
Chipset Software Installation Utility
3-1-2-1. Introduction
The Intel
®
Chipset Software Installation Utility installs Windows *.INF files to the
target system. These files outline to the operating system how to configure the Intel
chipset components in order to ensure the following features function properly:
• SATA Storage Support (SATA & SATA II)
• USB Support (1.1 & 2.0)
• Identification of Intel
®
Chipset Components in Device Manager
3-1-2-3. Installing Intel® Chipset Driver
The utility pack is to be installed only for POSReady 7 & Windows 8 & Windows
10 series, and it should be installed right after the OS installation is completed.
Please follow the steps below:
1. Connect the USB DVD-ROM device to PA-6225 and insert the driver disk.
2. Open the “Main Chip” folder where the Chipset driver is located (depending
on your OS platform).
3. Click Setup.exe file for driver installation.
4. Follow the on-screen instructions to complete the installation.
5. Once the installation is completed, shut down the system and restart PA-6225
for the changes to take effect.
To Next Page
Loading...
Need help?
General