3-4-2. Accessing Setup Utility
When the system is powered on, the BIOS will enter the Power-On Self-Test (POST)
routines and the following message will appear on the lower screen:
POST Screen
Press <Del> to access the Setup Utility program and the Main menu of the Aptio
Setup Utility will appear on the screen
If you enter incorrect passwords for 3 consecutive times, the screen will be locked
and you will not be able to enter any data unless the system is restarted.
The language of the BIOS setup menu interface and help messages are shown in US
English. You may use the up <↑> /down <↓> arrow key to select among the items and
press Enter to confirm and enter the sub-menu. A brief help message of the selected
item will also appear at the bottom of the screen for your information. The following
table provides the list of the keys that you can use while operating the BIOS setup
menu.
To Next Page
Loading...
Need help?
General