protech PA-6225 - Page 111

Chapter 3 Software
PA-6225 SERIES USER MANUAL
Page 104
GS / m
[Name]
Print downloaded bit image.
[Format]
ASCII GS / m
Hex. 1D 2F m
Decimal 29 47 m
[Range]
0 ≤ m ≤ 3, 48 ≤ m ≤ 51
[Description]
This command prints the downloaded bit image defined by GS * according to
the mode denoted by m.
m
Mode
Vertical dot
density(DPI)
Horizontal dot
density(DPI)
0 , 48
Normal
203
203
1 , 49
Double-width
203
101
2 , 50
Double-height
101
203
3 , 51
Quadruple
101
101
GS B n
[Name]
Turn white/black reverse printing mode on/off
[Format]
ASCII GS B n
Hex. 1D 42 n
Decimal 29 66 n
[Range]
0 ≤ n ≤ 255
Initial Value n = 0
[Description]
Specifies or cancels black and white inverted printing.
 Cancels black and white inverted printing when n = <*******0>B.
 Specifies black and white inverted printing when n = <*******1>B.
 n is effective only when it is the lowest bit.
 Internal characters and download characters are targeted for black and
white inverted printing.
 This command is effective for ANK and Chinese characters.