protech PA-6225 - Page 122

Chapter 3 Software
PA-6225 SERIES USER MANUAL
Page 115
[Description]
Prints QR Code data based on the specified contents.
model: Specifies a model
e: Selects an error correction level.
’L’ (4CH), ’M’ (4DH), ’Q’ (51H), ’H’ (48H)
v: =0: Automatic selection
(A version is automatically selected depending on the number of input data.)1 ≤
v ≤ 40 Fixed version (up to 14 for model-1)
mode: Specifies a mode of data.
Mode
Hexadecimal
Mode
N
4E
Numerical mode
A
41
Alphanumeric mode
B
42
8-bit byte mode
K
4B
Kanji mode
M
4D
Mixed mode
nl, nh: Specifies the number of data.
Data: Kanji data of the QRCode data should be set by Shift JIS code.
KANJI CONTROL COMMANDS DETAILS
FS ! n
[Name]
Set print mode(s) for Kanji characters.
[Format]
ASCII FS ! n
Hex. 1C 21 n
Decimal 28 33 n
[Range]
0 ≤ n ≤ 255
Initial Value n = 0
[Description]
Batch specifies the Kanji character print mode.
Bit
Function
“0”
“1”
7
Underline
Off
On
6
Undefined
5
Undefined
4
Undefined
3
Double tall expanded
Off
On
2
Expanded wide
Off
On
1
Undefined
0
Undefined