protech PA-6225 - Page 124

Chapter 3 Software
PA-6225 SERIES USER MANUAL
Page 117
FS S n1 n2
[Name]
Set Kanji character spacing
[Format]
ASCII FS S n1 n2
Hex. 1C 53 n1 n2
Decimal 28 83 n1 n2
[Range]
0 ≤ n1 ≤ 255, 0 ≤ n2 ≤ 255
Initial Value n1 = 0, n2=0
[Description]
Sets the Kanji character space amount and right space amount.
 Left space amount: n1 x (basic calculated pitch)
 Right space amount: n2 x (basic calculated pitch)
FS W n
[Name]
Turn quadruple-size mode on/off for Kanji characters.
[Format]
ASCII FS W n
Hex. 1C 57 n
Decimal 28 87 n
[Range]
0 ≤ n ≤ 255
Initial Value n = 0
[Description]
Specifies or cancels quadruple size Kanji character.
 Cancels quadruple size when n = <*******0>B.
 Specifies quadruple size when n = <*******1>B.
 n is effective only when it is the lowest bit.