3-2-2-2. OPOS Driver
The MB4000_OposSetup.exe program sets up the registry information and example
program of VFD for OPOS program uses.
1. Installation
The following steps guide you to install the MB4000_OposSetup program.
• Run the MB4000_OposSetup setup file
• This setup also installs the Prox-PMP4000 program.
• Follow the wizard instructions to complete the installation.
2. Launching the Program
The following steps guide you to load the Prox-PMP4000 program.
• Click LineDisplay folder from the path C/Program Files(x86)/Protech OPOS/POS
VFD/MB4000
• Click Prox-PMP4000 to launch the program.
To Next Page
Loading...