protech PA-6225 - Page 94

Chapter 3 Software
PA-6225 SERIES USER MANUAL
Page 87
[Description]
Sets horizontal tab position
 n specifies the column number for setting a horizontal tab position from the
left margin or the beginning of the line.
 k indicates the number of horizontal tab positions to be set.
ESC E n
[Name]
Turn emphasized mode on / off.
[Format]
ASCII ESC E n
Hex. 1B 45 n
Decimal 27 69 n
[Range]
0 ≤ n ≤ 255
Initial Value n = 0
[Description]
This command turns emphasized mode on or off by toggling the least
significant bit of n like following.
When the LSB of n is 0, the emphasized mode is turned off.
When the LSB of n is 1, the emphasized mode is turned on.
ESC G n
[Name]
Turn double-strike mode on/off.
[Format]
ASCII ESC G n
Hex. 1B 47 n
Decimal 27 71 n
[Range]
0 ≤ n ≤ 255
Initial Value n = 0
[Description]
Specifies or cancels double printing.
Cancels double printing when n = <*******0>B.
Specifies double printing when n = <*******1>B.
 n is effective only when it is the lowest bit.
 This printer is not capable of double printing, so the print is the same as
when using emphasized printing.
 This command is enabled for ANK characters
ESC J n
[Name]
Print and feed paper.
[Format]
ASCII ESC J n
Hex. 1B 4A n
Decimal 27 74 n
[Range]
0 ≤ n ≤ 255
[Description]
This command prints the data in the print buffer and feeds the paper [n X