protech PA-6225 - Page 96

Chapter 3 Software
PA-6225 SERIES USER MANUAL
Page 89
 The following commands are invalid in page mode.
a. FS p :Print NV bit image
b. FS q :Define NV bit image
c. GS v 0 :Print raster bit images
d. GS L :Set left margin
 Recover to standard mode using ESC @ (initialize printer).
ESC M n
[Name]
Select character font.
[Format]
ASCII ESC M n
Hex. 1B 4D n
Decimal 27 77 n
[Range]
n = 0, 1
Initial Value n = 0
[Description]
This command selects ANK character fonts using n as following.
n
Function
0
Character font A selected
1
Character font B selected
ESC R n
[Name]
Select an international character set.
[Format]
ASCII ESC R n
Hex. 1B 52 n
Decimal 27 82 n
[Range]
0 ≤ n ≤ 16
Initial Value n = 0