7-2 Saving and loading
[1] The current LCD screen data and title maybe saved in a memory location by selecting the
memory location with the keys and pressing the (save).
F2
Note:
In the counter mode, pressing the key will store the frequency value indicated
by the marker.
F2
[2] Previously stored data and title name may be recalled from a memory location by selecting
the desired memory location with the keys and pressing the (Load) key.
F3
[3] Press the (End) key when finished.
F4
[4] Frequency measurements in the counter mode may be saved and recalled in the data memory,
when in the Run mode, pressing the key will continuously store and update the
frequencies displayed at the marker indicator.
F1
7-3 Assigning a title name
☞ To assign a title name to a display stored in the data memory use the following key sequence:
F4
MENU ENTER F3
End
(Select Data
Memo.)
(Select Data
Memo. Location)
Load
F4
F2
F1 F1 ENTER
End
Save
(Select Data
Character ③)
(Shift to next
Character pos.)
(Select next
Character etc.)
Name
38
38
To Next Page
Loading...
Need help?
General
