[5] A step frequency of frequency difference is selected by pressing the keys or
rotating the dial knob and then pressing the key.
ENTER
[6] When entering a step frequency from the keyboard, step frequencies of multiples of 5KHz
or 6.25KHz must be entered. When entering a difference frequency value, pressing the
key prior to entering a difference frequency will enter a + (positive) frequency
value. Pressing the key will enter a ā (negative) frequency value.
0
1
3 MODE (demodulation mode)
[1] Pressing the key displays the type of demodulation that is required for aural
reception. There are 4 reception (demodulation) modes available, wide band FM, Narrow
band FM, AM and Single side band.
F3
[2] To select a reception (demodulation) mode press the keys or rotate the rotary dial
knob and then press the key.
ENTER
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
FAX 781.665.0780 - TestEquipmentDepot.com
To Next Page
Loading...
