Page 6
Chapter 2 Installation
Power Supply Requirements
Power Supply RequirementsPower Supply Requirements
Power Supply Requirements
The blackbox can operate from AC supply or from a DC battery. The AC is
either 115V +5%/-10% 50/60Hz or 230V =5%/-10% 50/60Hz, depending
on the position of the selector switch. The DC is 10-28V. In all cases the
blackbox will typically consume 5W of power, with a maximum of 10W.
Location
LocationLocation
Location
All electronic products are susceptible to electrostatic
shock, so follow proper grounding procedures during
installation.
The blackbox level controller must be mounted in a non-hazardous (safe)
Area, and the transducer fitted in the hazardous area.
To Next Page
Loading...