Page 40
P988 Call Type
This parameter determines what type of connection is made via the modem.
1 = Ring
This option initiates a connection to a
remote modem/computer which will then
allow remote communication with the unit.
Please consult Pulsar or your local
distributor for further details.
2= SMS
This option initiates a predetermined
message which is sent to the remote
telephone number detailing date and time
the alarm was initiated, the site ID, alarm
condition and level at the time the alarm
was initiated.
SMS Time
The following parameters determine when and how often a SMS message is
to be sent.
P995 SMS Interval
This parameter determines how often a SMS message will be sent. If the
time interval is set at ‘0.00 mins.’ then a SMS message will only be sent
when an alarm condition occurs, when the time interval is set to anything
other that zero then a SMS message will be sent at the relevant interval
detailing the current level and/or any alarm condition present at that time.
Entered in minutes. Min = 0.000, Max = 1440mins. Default = 0.00 mins.
P996 Start Time
Sets the time at which the SMS Interval is to Start.
Entered as time. Min = 00:00, Max = 23:59 Default = 00:00
P997 Stop Time
Sets the time at which the SMS Interval is to Stop.
Entered as time. Min = 00:00, Max = 23:59 Default = 23:59
To Next Page
Loading...
Need help?
General