Page 18
Keypad
Hot Keys
There are five hot keys on the keypad, which can be used to quickly access
common parameters for viewing only, while in Run Mode. Pressing the hot
key once will display the first parameter, then repeated pressing will display
subsequent parameters, as available, then the blackbox reverts to Run Mode.
In program mode, they have different functions, the functions are shown
below.
Hot
Key
Run Mode Program Mode
Not used with blackbox 133. Not used with blackbox 133.
Echo Confidence/echo
strength/H.A.L.L./average &
peak noise/temperature.
Not used with blackbox 133.
Not used with blackbox 133.
Reset parameter to default
setting.
Instantaneous mA output.
Not used with blackbox 133.
Gives readings of Distance,
Level or Space in units of
measurement.
Not used with blackbox 133.
Not used with blackbox 133.
Takes you to the last
parameter edited, when you
first enter program mode.
Gives details of unit type,
software revision and serial
number.
Enter Decimal Point.
To Next Page
Loading...