Pulsar NOVA - Views

Pulsar Nova® sound level meter user manual
Page 48
Views
Sound Level View
 Sound Level: Lxy, x=A ,C ,Z; y= ‘F’ (Fast), ‘S’ (Slow) & ‘I’ (Impulse)
 Maximum Sound Level: LxyMax where x=A ,C ,Z; y= ‘F’ (Fast), ‘S’ (Slow) & ‘I’
(Impulse)
 Minimum Sound Level: LxyMin where x=A ,C ,Z; y= ‘F’ (Fast), ‘S’ (Slow) & ‘I’
(Impulse)
 Measurement Run Time
Leq View
 Lxeq where x = A, C, Z
 LCPeak, LZPeak,
 LCeq-LAeq,
 LxE where x = A ,C, Z
 LAeq,I (Also known as LAIeq,t) - replaces LCeq-LAeq when Impulse Time Weighting
is selected)
 Graphical: Short LAeq, LCPeak
 Measurement Run Time
 Taktmaximal levels and integrated levels, and 3 and 5 seconds, ‘F’ (Fast) and ‘I’
(Impulse) time weighted (only displayed when set to German language)
1:1 Octave Band View
 Graphical display of L
F
real time octave bands with the highest value for each band
(updated every 1/16 seconds) from 32Hz to 16kHz (16Hz 1:1 Octave Band stored for
display in the AnalyzerPlus software)
 Graphical display of cumulative Leq for each octave band
 Graphical display of cumulative LAeq for each octave band
 Numeric display of Leq,1s real time octave bands (updated every 1 second)
 Numeric display of cumulative Leq for each octave band
 Numeric display of cumulative LAeq for each octave band
 Measurement Run Time
Ln View
Measures and stores statistical values during measurements
Provides 7 Ln values to 0.1dB resolution
 L1.0
 L5.0
 L10.0
 L50.0
 L90.0
 L95.0
 L99.0
Ln values are calculated using 1/16 second L
AF
samples by default. Sampling rate, time
weighting and frequency weighting can be changed in AnalyzerPlus.