Pulsar NOVA - Data Management; Timers and Notes

Pulsar Nova® sound level meter user manual
Page 33
Review Stored Data
Using the left and right keys moves between the different Views (see previous chapter
for details) and the up and down keys move between the Pages of each View. The status
bar will tell you which measurement you are looking at out of the total (for example
Measurement 4 of 9).
Clear Memory
Permanently deletes all stored measurements.
Storage Options
Repeat Timer
This sets the measurement time of repeated measurements. Setup options are Timer
On/Off and measurement time (1min, 2min, 5min, 10min, 15min, 30min, 1hr, Custom
or Day/Evening/Night).
The default is: Off, run time 10min.
Single Timer
This sets the measurement time of a single one-off measurement. Setup options are
Timer On/Off and measurement time (1min, 2min, 5min, 10min, 15min, 30min, 1hr,
Custom or Lden (day, evening, night)).
The default is: Off, run time 10min.
Audio Note
Audio Note can be enabled to allow an audio note to be made before every measurement
or disabled from within AnalyzerPlus.
The default is: On.
View Options
Time Weighting
This sets the Time Weighting that you use to view the measurements either in real time,
recording or review mode – remember the Nova® measures ALL the different Time
Weightings ALL the time. The view options are ‘F’ (Fast), ‘S’ (Slow) and ‘I’ (Impulse).
The default is: ‘F’ (Fast).