Pulsar NOVA - Dose View; Stored Measurements; Sound Level View; Leq View

Pulsar Nova® sound level meter user manual
Page 49
Dose View
Integrator 1 Integrator 2 Integrator 3
Run Time Run Time Run Time
Leq1 Leq2 Leq3
LEP,d (Lex) TWA TWA
Dose % Dose % Dose %
Est Dose % Est Dose % Est Dose %
Configuration Configuration Configuration
Measurement Run Time
Stored Measurements
Sound Level View
 Overall: Lxy Max where x = A, C, Z; y = ‘F’ (Fast), ‘S’ (Slow) & ‘I’ (Impulse) (9
items).
 Time History: Lxy Max where x = A, C; y = ‘F’ (Fast), ‘S’ (Slow) & ‘I’ (Impulse) (6
items).
 Time History: Lxy Min where x = A, C; y = ‘F’ (Fast), ‘S’ (Slow) & ‘I’ (Impulse) (6
items).
 Measurement Run Time
 Time & Date of Measurement Start
 Time History data rate is user configurable in the global settings
Leq View
 Overall: LCPeak, LZPeak. LAeq, LCeq, LZeq (5 items).
 Time History: LAeq, LCeq, LZeq
 Time History: LCPeak, LZPeak, LAPeak
 Time History: LAeqI (also known as LAIeq,t)
 Time History data rate is user configurable in the global settings
 Measurement Run Time
 Time & Date of Measurement Start
Dose View
 Overall: LAeq2, LAeq3. (Lavg stored, TWA, % Dose & Est % Dose also available)
 Time History: LAeq2, LAeq3
 Time History data rate is user configurable in the global settings
 Measurement Run Time
 Time & Date of Measurement Start
 Integrator 1 values are stored in the Leq module
1:1 Octave Band View
 Overall Leq for each octave band
 Overall LAeq for each octave band
 Time History: Leq for each octave band. (10 items) stored at the Global data rate
(minimum duration of 1/16 seconds)