Pulsar NOVA User Manual

Pulsar Nova® sound level meter user manual
Page 34
Adjust Screen Brightness
Screen brightness can be set to automatic mode, or set to a fixed brightness level.
The default is: Auto.
Language
The Nova® can be set to the following Languages: English, French, German, Spanish
and Italian. Some other languages are available to special order.
The default is: English.
Please note: when changing language, the instrument must be restarted for the change
to take effect.
Display Mode
The Nova® range has two Display Modes, Standard and Advanced. In Standard Mode
only the most common parameters required are displayed in real time, recording and
review mode – remember the Nova® measures ALL the different measurement
parameters ALL the time, this setting just affects what parameters are displayed on the
display. If a measurement has been made with the Nova® set in Standard mode, all the
parameters will still be available to download into AnalyzerPlus for review afterwards if
required. For a full list of what is displayed in each mode go to Stored Measurements on
page 48.
The default is: Standard display mode.
Advanced Options
Restore Factory Settings
Restores the instrument back to its original factory setup.
Information
The capabilities of the instrument, serial numbers of the instrument, microphone and
preamplifier along with details of the standards that the instrument meets are all
available to view in the Information menu.
The firmware version of the instrument is available on Information page 1. Selected by
Menu>Advanced Options>Information.

Pulsar NOVA Specifications

General

Brand	Pulsar
Model	NOVA
Category	Measuring Instruments
Language	English