This view shows you the Leq, Peak,
and C-A values with a choice of A, C
and Z frequency weightings.
The C-A data can be used with the
HML method for selecting hearing
protection.
If the Time Weighting is set to
Impulse, the C-A function is replaced
by LAeq,I (also known as LAIeq).
When the instrument is set to the
German language, an additional
‘Taktmaximal’ page is also available.
The Dose View shows you a number
of different functions depending upon
the configuration of the Quick
Settings.
For the UK option, this View gives
you Leq, LEP,d, % Dose and
Estimated Dose along with the
Projected Exposure Calculator.
For the EU option, this View gives
you Leq, LEX,8, % Dose and
Estimated Dose along with the
Projected Exposure Calculator.
For all other options the Lavg, TWA,
% Dose and Estimated % Dose for
two integrators, in addition to ISO
(EU), will be shown according to the
setting you have chosen.
Two custom integrators can also be
used, configured in AnalyzerPlus.
When chosen, they will be shown in
addition to ISO (EU).
To Next Page
Loading...
