Pulsar Nova® sound level meter user manual
Page 42
Connect the Nova® to your PC using the supplied mini-B USB cable using the USB
connector under the removable rubber connector panel at the bottom of the instrument.
When the AnalyzerPlus software is run, it will automatically find the instrument plugged
in and look for completed measurements to download. The popup download window can
be closed.
At the bottom of the main screen the Configure button next to the instrument details
will bring up the Instrument Settings pop-up window, where the relevant instrument
settings can be configured.
For further information on how to use the AnalyzerPlus software please refer to the
software help files/videos on our website www.pulsarinstruments.com under the
software tab for each of the Pulsar Nova® models.
To Next Page
Loading...
