Pulsar Nova® sound level meter user manual
Page 36
DC Output Settings
The DC Output can be set to LAF, LCF, LZF, LAS, LCS, LZS, LAI, LCI OR LZI. There is
also the ability to set a V/dB Correction within AnalyzerPlus.
The defaults are: LAF and +5.96% V/dB Correction.
Memory Options
A Partition Editor in AnalyzerPlus allows the adjustment of the storage settings available
for Audio and Time History recording.
Pause/Back Erase
The Pause/Back Erase feature can be enabled or disabled within AnalyzerPlus. When
Pause is enabled the Back Erase feature is also enabled at the same time.
The defaults are: Pause Enabled and 5 seconds Back Erase length.
Time and Date Format
It is possible to change the Time and Date format to any of the following:
dd/mm/yy, mm/dd/yy, dd.mm.yy, dd-mm-yy, yy-mm-dd
hh:mm:ss, hh:mm:ss AM/PM
The defaults are: dd/mm/yy and hh:mm:ss.
To Next Page
Loading...
