Pulsar Nova® sound level meter user manual
Page 14
Inserting the batteries
Your Nova® is powered by 6 x AA batteries (also called MN1500 or LR6). We
recommend that you use alkaline, lithium or high quality rechargable batteries to give
the best performance.
Remove the battery cover by loosening the captive battery cover retaining screw (as
shown below). The included Pulsar Instruments keyring is designed exactly for this
purpose.
Please look carefully at the diagram inside the battery compartment that shows the
correct polarity. After inserting the batteries in the correct orientation, replace the cover
and tighten the battery cover retaining screw.
Whenever the instrument is not used for a long period of time,
remove the batteries to prevent damage from leakage.
Damage caused by leaking batteries is NOT covered by the
warranty.
To Next Page
Loading...
