23.07.2019
Punkt. MP02 Mobile Phone - Instruction manual
Sounds
23
Ringtone selection
A range of ringtones are available; it is
also possible to have no sound at all when
there is an incoming phone call.
⏤ To choose a ringtone option
• From the Main menu, select Settings,
then Sounds, then Calls.
• Listen to the available ringtones by
selecting them; repeat by pressing the
k. key again. (This will not work if
the phone is in Silent mode.)
• When the desired option has been
selected (it will be marked with a
solid circle), press the End or Back
key to exit.
Message alert selection
A choice of two text message (SMS) alert
sounds are available; it is also possible to
have no sound at all when a text message
arrives.
⏤ To choose a ringtone option
• From the Main menu, select Settings,
then Sounds, then Messages.
• Listen to the two options by selecting
them; repeat by pressing again.
(This will not work if the phone is in
Silent mode.)
• When the desired option has been
selected (it will be marked with a solid
circle), press the End or Back key to
exit.
Phone volume level
The MP02’s ringtone and text alert
volume levels, together with other alert
tones, can be collectively adjusted as
follows.
• From the Main menu, select Settings,
then Sounds, then Phone volume.
• Use the Up and Down keys to choose
the desired level.
• Press the End or Back key to exit.
If the ringtone does not sound when a
call is received, despite the phone not
being set to silent, this may be because
call diversion is active.
Silent mode
The phone’s sounds (except the alarm
clock) can be temporarily muted by
activating Silent mode.
• In the Status menu, highlight Silent
mode and press the key.
• Repeat to deactivate Silent mode.
• (This can also be done via the Sounds
menu.)
Vibration alert feature
The vibration alert feature provides a
relatively discreet indication of an
incoming call or text message. When it is
in “On” mode, it will always be activated
when a call or text is received, even when
the phone is on silent.
Switching off the vibrating alert will help
conserve the battery’s charge level.
⏤ To turn the vibration alert on or off
• From the Main menu, select Settings,
then Sounds, then Vibration.
• Press the key to toggle between
On and Off.
Even when both the ringtone and
vibration alert are both deactivated, the
MP02 will still indicate an incoming call
via a message on the screen.
Start-up/shut-down sound
The MP02 can make a columbine sound
when it is switched on and off.
⏤ To start or stop the pigeon
• From the Main menu, select Sounds,
and then Start-up sound.
• Press the key to toggle between
On and Off.
To Next Page
Loading...
